Introduction
Draining an above ground pool is a necessary task for various reasons, such as cleaning, repairs, or winterization. Properly draining the pool ensures that the process is efficient and avoids any potential damage. Follow this step-by-step guide to drain your above ground pool safely and effectively. Visit and get small rectangular above ground pool.
Gather the Necessary Equipment
Before you begin draining your above ground pool, gather the necessary equipment. You will need a submersible pump, a garden hose (if your pump does not come with one), a drainage location or receptacle, and any additional accessories required by your specific pump model.
Turn Off the Pool Equipment
Before starting the draining process, turn off all pool equipment, including the pump, filter, and heater. This prevents any damage or interference during the draining process.
Attach the Hose to the Submersible Pump
If your submersible pump did not come with a hose, attach a garden hose to the pump. Ensure a secure connection to prevent leaks.
Submerge the Pump in the Pool
Submerge the pump into the pool, making sure it is fully submerged in the water. Place it in the deepest part of the pool for optimal drainage.
Connect the Other End of the Hose
Connect the other end of the hose to the designated drainage location or receptacle. Ensure that the hose is long enough to reach the desired location and that it is positioned to allow smooth water flow.
Start the Pump
Plug in the submersible pump and turn it on. It will begin pumping water out of the pool and through the hose. Check that the water is flowing properly and adjust the hose if necessary to avoid any kinks or obstructions.
Monitor the Draining Process
Keep a close eye on the draining process to ensure everything is functioning correctly. Check the pump periodically to ensure it is operating smoothly and that water is being pumped out effectively.
Adjust the Hose Position as Needed
If you notice any issues with the water flow or if the draining process seems slow, adjust the position of the hose. Make sure it is not clogged, twisted, or blocked by any objects. A clear and unobstructed hose will facilitate efficient drainage.
Discharge the Water Properly
Consider where you will discharge the pool water. Avoid draining it onto neighboring properties, storm drains, or areas that could cause flooding or damage. Opt for a suitable drainage location, such as a sewer cleanout, a dedicated drainage area, or an appropriate receptacle.
Monitor the Water Level
As the water level decreases, monitor it closely. Do not let the pump run dry as it can cause damage. Once the water level reaches a point where the pump is no longer submerged, turn off the pump and disconnect it from the power source.
Store the Equipment
After draining the pool, disconnect the hose from the pump and properly store both the pump and the hose. Rinse them with clean water to remove any debris or residue. Store them in a dry and safe place until they are needed again.
Conclusion
Draining an above ground pool is a straightforward process when done correctly. By following this step-by-step guide, you can efficiently drain your pool and ensure that it is ready for cleaning, repairs, or winterization. Remember to comply with any local regulations regarding pool drainage and take the necessary precautions to prevent any damage during the draining process.
