How to Use a Parmak Fence Charger

The Parmak fence charger is a very useful piece of equipment for any homeowner. However, it is important that you use it correctly. There are several things that you should do to make sure that the Parmak fence charger is working properly. For example, you should always ground the device, check for loose connections, and troubleshoot any issues that you may have.

Check for loose connections in the fence wire

If you have a dog fence, you need to know how to check for loose connections in the fence wire. This is an easy way to detect a possible problem. However, this isn’t the only thing to consider when inspecting your fence. You also need to make sure it’s clean and that it’s insulated from damage.

Using a volt meter is a good way to test the fence voltage. It should be lower than 2000V (2kV) or even less. But if you’re reading a lot more than a kilowatt, you’re probably dealing with something more serious.

One of the best ways to tell if a wire is defective is to look for the tick-tick-tick sound. The sound will get louder the closer it is to the fault.

Other signs of an electrical problem include a blown fuse, sparks, or a poor ground system. In some cases, an energizer will need to be replaced. Also, your batteries may need to be replaced.

You can also use a short loop test to test for a broken wire. You should be able to pull the wire out of the ground, but if it’s not connected correctly, it should not make the same noise.

If you’re not sure which wire is bad, you can always take a look at the insulator. A damaged insulator will allow your electric fence to touch the fence post. Using a non-metallic paint, mark the bad insulator.

Another method is to dig up the area surrounding your fence. You’ll likely find the source of the problem. Make sure you use insulated gloves, a flashlight, and a volt meter.

Finally, if you’re dealing with a large or complex fence, you should be looking at a professional. These professionals can test for and repair any problems you may be experiencing with your electric fence.

Whether you’re working on a pet fence, a livestock fence, or a commercial fencing project, using the right tools is essential. From a volt meter to an ohm meter, there are a number of tools available to keep your fence working in top shape.

Ground the charger properly

Parmak fence chargers are high performance, low impedance models. They can be used with poly tape and high tensile multi-wire fences. These fencers are equipped with a unique performance meter that will give you the best possible output.

Parmak fencers are UL listed. There are models such as EM-200 and DF-SP-LI. Each model is equipped with an exclusive performance meter and is capable of charging over 50 miles of fence. It is important to keep a close eye on the grounding of your fence charger.

To check if your fence charger is grounded properly, use a voltage tester. The most accurate method is to connect the tester to the ground wires on your fence line. You may also want to test power coming from an outlet or other electrical device.

Grounding is necessary to prevent damage to your fence and energizer. In fact, 98% of lightning damage to your fence controllers will come through your power line.

When you install a new fence, you need to know the proper way to ground your fence charger. Use your owner’s manual for more information. Depending on your charger, you will need at least three 8-foot copper ground rods.

Most grounding rods are made of galvanized steel or copper. Make sure that the type of wire you are using matches the rod. For example, if you are using a 20-kilovolt insulated wire, you should be connecting it to the negative terminal on the charger.

If your charger is reading less than 1,000 volts, you should replace it. Otherwise, you should disconnect the hook-up wire.

The battery can be drained by animals testing your fence. Also, the charger may be malfunctioning or the circuit may be tripped. Using a surge protector between the electrical outlet and the fence charger can help.

Electric fence chargers are a valuable tool for containing small animals, controlling farm animals, and preventing animal access. However, they need regular maintenance. Using a quality fence charger and keeping it grounded will help prevent unnecessary electrical shocks and costly repairs.

A good grounding system consists of at least three 6-8-foot ground rods and an insulated hook-up wire. Adding deeper ground rods can help to prevent damage to the fencer.

Troubleshoot any problems

The Parmak fence charger is an electrical device that provides power to an electric fence. This device may require regular maintenance and troubleshooting to ensure its proper operation. There are a number of problems that may occur with a fence charger, such as an energizer that doesn’t work or an energizer that is causing a voltage issue.

One of the first things that you should do if your fence charger isn’t working is to replace the fuses and re-power the unit. You should also check for any loose connections. These may be caused by a damaged wire or a splice joint. If you have a fence charger with a performance meter, you should read the meter to determine if it is functioning properly.

Another problem that can cause a fence charger to malfunction is poor ground systems. Ground problems can impede the flow of electricity through the soil and interfere with the fence’s performance. Adding more ground rods to the system may help resolve this problem.

Another common problem with a fence charger is a faulty splice joint. This type of joint is often a sign that your fence hasn’t been installed correctly. It’s also important to check the length of your fence.

If you have a Parmak fence charger, it can be returned for free service if it is damaged by lightning. The charger will then be guaranteed to function as it did before the storm.

Lightning damage is one of the most common causes of electric fence charger malfunctions, so it’s important to take measures to prevent this from happening in the future. Some Parmak models are equipped with lightning arrestors on their AC line, which will reduce the impact of a thunderstorm on the charger.

During an electrical storm, it’s also a good idea to disconnect your fence from the main power source. A surge protector can be placed between your electric outlet and your fence charger to provide additional protection.

An energizer that is displaying a low voltage reading indicates a faulty energizer or a faulty ground system. For more information on how to test your energizer, visit the Cyclops charger FAQ page or watch the video tutorials.


When it comes to purchasing a fence charger, there are several things to keep in mind. One of the most important is to choose a device that offers enough power. For example, if you want to protect your livestock or pets, you will need a charger that can generate at least 0.1 joules of output.

Another important aspect is the type of battery used in the electric fence. Some are solar powered, while others use a direct AC power supply. You will also need to know how long the battery will last. In general, you can expect a 6 hour battery life with a good fence charger.

Another important thing to consider is the manufacturer’s warranty. Most good brands offer at least a year of protection. Other manufacturers may offer two or three years of protection.

Parmak is one of the most reputable brands when it comes to electric fence chargers. They are highly effective and are ideal for large scale applications. This charger can deter animals and protect people and livestock from harm.

Using a Parmak charger will help you save on your operating costs. It is highly durable and combines the convenience of a power line with the safety of a battery fencer. If you are concerned about lightning damage, you will be pleased to know that the Parmak fence charger has the most technically advanced three year warranty available.

Parmak is a reputable brand, and they offer excellent customer service. They will provide you with the date of purchase and the serial number of the product. Moreover, they will notify you of any upgrades they plan to make.

Another brand to consider is Premier Solar. Their products have been designed with the user in mind. The Premier Solar Intellischock 60 solar fence charger is perfect for containing large animals. The charger has a built-in overcharge regulator and a sealed lead acid battery. The power output is 0.60 joules and the range is 0.5 to 1 mile.

Finally, the Gallagher S12 is a powerful and reliable solar fence charger. It has a large solar panel that charges the battery during the day.

Leave a Reply

Your email address will not be published. Required fields are marked *